There are 8 products.
This HDD / SSD Docking Station in by Delock enables an external connection of up to four 2.5″ or 3.5″ SATA HDDs / SSDs through the USB interface, as well as the simple exchange of the drives by Hot Swap.
It is also possible to connect a single hard disk to the computer by using the eSATA connector.
HDMI is extremely widespread, so this docking station now comes with dual HDMI interface, plus the VGA classic. Also the question to the right, left, top or bottom has now been resolved, because top and bottom are now the same and due to the nylon coated 50 cm long cable, the orientation can now be chosen freely - universal!
The ICY BOX IB-DK4050-CPD is a docking station that allows you to extend the connectivity of your computer via a USB 3.0 Type-C port. It offers two USB 3.0 Type-A and two USB 2.0 Type-A ports for your peripherals, a Power Delivery 3.0 Type-C charging port for up to 100W of power, a Gigabit LAN RJ45 interface (10/100/1000 Mbit/s), two HDMI video interfaces that support unique resolutions of up to 3840x2160 @ 60 Hz, plus a DisplayPort 1.4 video interface that supports unique resolutions of up to 3840x2160 @ 60 Hz DisplayPort 1.4 video interface that supports unique resolutions up to 3840x2160 @ 60 Hz and finally an SD and micro SD memory card reader. This USB 3.0 Type-C docking station allows you to access both installed memory cards simultaneously thanks to the Multi-LUN feature.
USB 3.0 & eSATA 4-bay HDD docking station with one touch cloning feature.
Suitable for up to four 2,5"/3,5" SATA HDDs/SSDs
One touch cloning feature
Sector-by-sector copy incl. boot partition
Hot swap feature (based on the USB connection between the docking station and the computer)
Tool-free HDD/SSD exchange
USB 3.0 & eSATA connector
Experience a new mode in hard drive installation with the "Docking Station ICY-BOX, USB 3.2", allowing for quick and easy installation of 2.5", 3.5" HDD, or M.2 SSD drives. Just plug your drive into the assigned slot and enjoy the smooth copying process.
With it's software-free cloning technology, the process of creating a secure copy of your data has been simplified and streamlined.
With the power of USB 3.2 Gen 2 and the inclusive USB Type-C and Type-A cable, experience data transfer that's not just swift, but impressively efficient, boasting speeds up to 10 Gbit/s.
Benefit from precise duplication. Each bit is replicated from the source drive to the destination as a flawless copy of all data and configurations of the original drive.
The ICY BOX IB-DK4040-CPD is a docking station that allows you to expand your computer's connectivity via a USB 3.0 Type-C port. It offers three USB 3.0 Type-A ports for your peripherals, a Power Delivery 3.0 Type-C charging port for up to 100W of power, two HDMI and VGA video interfaces, a RJ45 Gigabit LAN interface (10/100/1000 Mbit/s), a 3.5mm stereo combo jack, and an SD and micro SD memory card reader. This USB 3.0 Type-C dock allows you to access both installed memory cards simultaneously with the Multi-LUN feature.
This HDD / SSD docking station by Delock enables an external connection of two 2.5″ or 3.5″ SATA HDDs / SSDs through the USB interface. This solution does not requires an external enclosure since the HDD / SSD will be plugged into the docking station directly. Furthermore the clone function enables to copy the content of one HDD to another without using a PC.
USB 3.0 dual bay HDD docking station with one touch cloning feature
